(815) 383-2513

©2019 by Jokerz Performance. Proudly created with Wix.com

Jokerz performance 2.4/2.7/3.0 IHI Race rebuild Series

Jokerz 2.4/2.7/3.0 ihi superchargers race rebuild series.

Is your highly modified IHI supercharger making noise. Jokerz can rebuild the supecharger to jokerz race spec using ceramic hybrid bearings that far exceed factory ratings. Our superchargers are test spun to ensure that our work is good to go before leaving our faculity. If your looking for the baddest rebuild jokerz offer this is the one for your race application. 

 

griptech in stock pulley 2.65/2.75/285

hellraiser pulley sizes are only 2.72 and 2.85

 

 

  • PRODUCT OVERVIEW

    - Superchargers are test spun from 4,000 rpms-10,000 rpms to check for rotor clearence, bearing binding or noise, and workmanship is inline for jokerz approval

    -Jokerz uses hybrid cermaic bearings rated at a higher rpm then stock and last 5x life of stock bearings. These bearings also offer freed up hp due to less rolling resistance and better tolerances.

    -rear bearings will remain stock due to being submerged in oil and not limited by double seals. these bearings being exposed to oil and requiring no seals gives them a higher rpm then the double sealed bearings.

    -Bearings rated for higher rpms over stock

    - Disassembly, cleaning, inspection upon arrival.

    -Blower is assembled to Jokerz race spec 

    -custom tooling is required and used by jokerz for assembly and dissassembly 

    -race rebuilds are built for race applications and are under heavy stress and conditions. jokerz can not insure any possibilities or failures due to this.

    -Extra charges may be given if hard or rotating parts are damaged. If pulley walked into or damaged snout extra work will need to be done in order to insure function of supercharger before rebuild begins. extra charges based on work performed will effect final bill. you will be contacted if anything extra is needed

     

  • TURN AROUND TIMES

    10-15 DAYS IS AVERAGE TURN AROUND TIMES. TIMES WILL VARY PENDING WORK LOAD AND SEASON

  • SHIPPING INFO

    • Once you checkout, print out your emailed receipt and put that in a box with your supercharger. 
    • Be sure to remove all sensors and gaskets,**gaskets, sensors, brackets etc. left on supercharger will be disposed once recieved** 
    • Our prefered shipping method is Fedex or UPS 
    • IF INVOICE IS NOT IN BOX, SUPERCHARGER WILL BE SET ASIDE UNTIL OWNER CONTACTS JOKERZ WITH TRACKING NUMBER & PROOF OF SHIPMENT
    • 204 W MAIN STREET ASHKUM ILLINOIS 60911 
$650.00Price
Rebuild Service
Pulley Selection